Site Search

Would you like more information emailed to you on any of these products?

Place a check mark next to the items you are interested in and submit the form below.

Your Name:
Phone Number:
Email Address:
Company Name:
Address:

CONTACT US

Name: Jonathan McLachlan
Email:
jonathan@skookum.co.nz
Ph: +64 9 276 2402
Cell: +64 276 488 488
Web:
www.skookum.co.nz

New Equipment - Hoggers & Chippers

Forano Disc Chipper Code: MA-32-EForanoDiscChipper
The USNR Forano Disc Shllipper is available in four sizes and three configurations to meet your specific wastewood processing requirements. Each model can also accomodate bottom, rear and top discharge for maximum flexibility.

HBS Bark Hogger Code: HBSBarkHog
630-36-EU

HBS Bark Hogger Code: HBSBarkHogb
840-64-EU

HBS Bark Hogger Code: HBSBarkHoga
840-44-EU

HBS Bark Hogger Code: HBSBarkHogd
1260-34-EU

HBS Bark Hogger Code: HBSBarkHoge
1260-32-EU

HBS Bark Hogger Code: HBSBarkHogc
1050-26-EU

HBS Bark Hogger Code: HBSBarkHogf
1460-32-EU

HBS Bark Hogger Horizontal Infeed Code: HBSBarkHogHorizontalInfeed

Horizontal Chipper System Code: MA-20-EHorizontalChipper
The Horizontal Chipper is a workhorse designed for high-production mills. Conical chip heads operate in the vertical plane which reduces side chipping forces, resulting in smoother feeding, better quality chips and longer-lasting knives.

Norman Disc Chipper Code: MA-33-ENormanDiscChipper
The exclusive, tested design of the USNR Norman Chipper is bringing greater profits to chip manufacturers around the world. Truly uniform chips are the result of the USNR Norman Chipper’s continuous cutting action that makes it the only chipper of its kind!

Optimised Chipper Spout Code: MA-28-EOptimisedChipperSpout
In a continued commitment to innovation, USNR has implemented several design changes to the Forano style chipper spout that improve chip quality and reduce maintenance costs.

Rotary Hog Code: MA-31-ERotaryHog
When it comes to shredding waste material, there just isn’t any better value than USNR’s Rotary Hog. These rugged machines provide maximum production at the lowest cost per ton.

Used Equipment - Fuel Handling

SOLD - Rubber Belt Conveyor - SOLD Code: 1341
Rubber belt conveyor, 32000 x 600mm, Powered by 3 phase electric motor

TS Manufacturing Vibratory Conveyors x 3 Code: 2188
Total length approx 52 metres x 600mm (w).

Vibrating conveyor Code: 3038
Vibrating conveyor manufactured by Gösta Hedlund AB. Length: 8 m. Width: 400 mm.

Bruks Feed Hopper Code: 3074
Bruks feed hopper with hydraulic dive, 3 kW. Volume: 6 m3.

Bruks Idler Roller Conveyor 600mm Code: 3060
Bruks idler roller conveyor. Complete with gear and motor. Length = 39 meter. Width = 600 mm.

Bruks Idler Roller Conveyor 800mm Code: 3059
Bruks idler roller conveyor, complete with gear and motor. Length = 11 meter. Width = 800 mm.

Bruks Scraper Conveyor Code: 3069
Bruks scraper conveyor. Length: 18 meter. Width: 500 mm. Complete with drive unit.

Bruks Tubulator TT 500 Conveyor Code: 3058
Bruks Tubulator TT 500 Conveyor. Length = 45 meter. Width = 500 mm. Capacity = 400 m3s / hour. Feed speed max 150 m/min. Length of each section = 6 meter.

Bruks Vibrating Conveyor Code: 3071
Vibrating conveyor made by Bruks. Length: 24 meter. Width: 450/650 mm. Incl. metal detector and built in screen.

Erjo Feed Hopper Type M10 Code: 3073
Erjo feed hopper type M10. Electric drive 1,5 kW. Capacity 10-30 m3/h.

IWD Tital VK-10 Strapping Machine Code: 2186
Strapping Machine, Height 3400mm - Width 2100mm

Jaymor Metal Detector Code: 2195
Jaymor Industries Ltd manufacture heavy duty industrial metal detectors to suit the individual customer's needs. The Jetscreen Metal Detector range will positively identify tramp metal before any damage is done further down the line.

Rens Metal Detector Code: 2194
Rens L240 Control Instrument has proven itself in hundreds of installations in the United States, Canada and in other countries.

SOLD - Auger Saw Dust Conveyors x 3 - SOLD Code: 1344
3 x Auger saw dust conveyors, 1 x 150mm diameter, 2 x 200mm diameter approximately 14 metres in overall length, powered by 3 phase electric motors

SOLD - Incline Airmax Rubber Belt Trough Conveyor - SOLD Code: 1346
Inclined Airmax Rubber belt trough conveyor, Approximately 150 metres x 600mm, Steel support legs to 6000mm (H), colour bond enclosure, emergency stop cable, approximately 7000mm, Steel support structure with 2 way directional off load chute, Powered by 3 phase ...

SOLD - Mild Steel Chip Cyclone - SOLD Code: 1340
Mild steel chip cyclone, 1800mm (H) x 1500mm diameter, bottom outlet

SOLD - Rubber Belt Conveyor - SOLD Code: 1343
Rubber belt conveyor, 6200 x 280mm, Powered by 3 phase electric motor

SOLD - Rubber Belt Conveyor - SOLD Code: 1345
Rubber belt conveyor, approximately 45000mm x 400mm mounted on steel legs, powered by 3 phase electric motor

SOLD - Rubber Belt Conveyor - SOLD Code: 1342
Rubber belt conveyor, 70000 x 450mm, Powered by 3 phase electric motor, includes safety lanyards x 2

Vibrating Conveyor GVC Code: 3063
Log haul manufactured by Hedlunds. Length: appr. 16 meter. Double chain with dogs. Has been in production appr. 1 year only.

Vibrating Conveyor Hammars Code: 3064
Hammars vibrating conveyor type Syncro Sher. Length = 8 meter. Width = 450 mm (bottom), 600 mm (top). Complete with drive unit.

Used Equipment - Hoggers, Chippers & Shredders

Bruks 812CS Drop Feed Drum Chipper Code: 2191
Efficient machines for chipping of short wood waste, such as trim ends, lily pads, joinery waste, veneer, and plywood, as well as for re-chipping. The combination of drop feed and excellent cutting geometry for short pieces gives you a better chip quality than what you ...

Bruks 820 CM Chipper Code: 2185
BRUKS stationary drum chippers are processing different kinds on input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

Bruks 820 CM Chipper Code: 2184
BRUKS stationary drum chippers are processing different kinds of input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

Erjo 165 SN Chipper Code: 2180
The ERJO chipper type 165 SN is gravity fed rotor chipper for production of fuel chips from all kinds of wood residues.

ERJO 204 MA Chipper Code: 2128
Type: ERJO 204 MA - Capacity: 8-15, 15-25 - Kw: 55 The ERJO 204 MA is especially designed to produce pulp and board chips of hard-to-handle sawmill waste. I.e. edgings, slabs, trimmings and tops, ERJO 608 MA can also produce fuel chips.

ERJO 235TS Chipper Code: 2190

Fulghum Chipper Code: 2189

WSM Hogger - Refurbished Code: 2187
West Salem Machinery Hogger Model 2432B Serial No. 5901104

Erjo 120 VS 456 Code: 3055
Erjo 120 VS 456 drop feed chipper for edgings, slabs and trimmings. Excl. motor. Drum diameter 120 cm. Drum width 45 cm. 6 knives. The chipper is reconditioned.

ERJO 200SN Chipper Code: 2101
Produces uniform sized fuel chips from: Woodwates, veneer, particle board, hardboard, plywood etc

Erjo 204 MA 450 Code: 3054
Drop feed chipper type Erjo 204 MA 450. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Reconditioned. Electrical motor 55 kW. 4 knives. Capacity appr. 15-25 m3 chips/hour.