Sawmilling

Bio Fuel

Bulk Handling

Spare Parts

Projects

Site Search

Category:





Keyword:

Would you like more information emailed to you on any of these products?

Place a check mark next to the items you are interested in and submit the form below.

Your Name:
Phone Number:
Email Address:
Company Name:
Address:

CONTACT US

Name: Donna Neil
Email:
donnan@skookum.co.nz
Ph: +64 9 276 2402
Web:
www.skookum.co.nz

Category: Sawmilling

Used Equipment

Optimized Docking Line Code: 1365
Dual Paul II Series Optimized Docking Line with New Ulti-Vision Colour Scanner

New Equipment - Log Processing

LASAR™ 3D Lasar Scanning Sensor Code: OP-04-ELasar
Full coverage 3D scanning sensor with unparalled resolution and data densityThe LASAR™ sensor is a unique and rugged, full-coverage hig-resolution 3D scanner that is ideal for close coupled sawing systems and large transverse deck bucking systems. ...

Log Bucking Optimizer Code: NM-OP-07-ELogBuckingOptimizer
The Newnes-McGehee (NM) Bucking Optimiser is the ideal companion for NM primary breakdown and curve sawing optimisers. The bucking optimiser uses complete optimisation algorithms rather than lookup tables to ensure optimum value recovery. Curved logs can be bucked to ...

MillExpert Log Optimizer System Code: OP-19-ELogOptimizer
Provides more value than any other systemThe Log Optimiser is part of USNR's MillWide suite of optimisation products. It combines dense 3D scan data with the power of today's high-speed computers to let you get the maximum value from every log.

MillWide Bucking Optimiser System Code: OP-02-EBucking
Full 3D modeling and optimisation capabilities for maximum valueWith more features, capabilities and scanning options than any other system in the industry, the MillWide Bucking Optimiser system combines dense 3D scan data with the power of today's high speed computers ...

Smart TriCam™ Lineal Scanning System Code: OP-06-ESmartTriCamLinealb
Most Accurate and Highest-Density 3D Lineal Scanning System in the IndustryThe Smart TriCam lineal scanning system provides complete profile measurements of objects moving longitudinally through a set of scanners. Smart TriCam sensors are available in single or ...

Used Equipment - Log Processing

Log sorting line 10 pockets (2x5) - Fagelfors Code: 3047
Discharges both sides - Primary log deck - step feeder - log haul - log grading and scanning - MCC and controls - Log sorter

Log sorting line 17 pockets (2x8+1) - Elverum Code: 3046
Discharges both sides - Primary log deck - secondary log deck - step feeder - log haul - log grading and Rema scanning - MCC and controls - Log sorter

Log Sorting Line 2x8 Pockets Code: 3018
Log sorting line manufactured by Smedbolaget/Ingvar Persson AB. Complete 2 part log deck,unscrambler, singulator, ABB metal detector, 2x8 pockets, scanner and EPS electronic control system. Log sorter.

Log sorting line 54 pockets (2x27) - Alex, Sweden Code: 3045
Discharges both sides - Primary log deck - Secondary log deck - Step feeder - Log haul - Log grading and scanning system - MCC and controls - Log sorter

New Equipment - Sawmills

BioVision System Code: OP-23-E

Cambio Ring Debarker Code: MA-15-ECambioRingDebarker
Cambio Ring Debarker - 18" - 24" - 30" Rugged - Dependable - Economical

Dynastar™ Code: OP-22-E

Edger Maximizer System Code: MA-06-EEdgerMaximizerSystem
Unscrambler - Transfer - Scanner - Infeed - EdgerThe USNR Edger Maximiser System is a complete package made up of state of the art modules

Extended Length Infeed Code: MA-44-E
Selecting the proper infeed is a critical step in the pursuit of maximum log recovery. The right infeed will deliver your log in position to make the best first cut; a cut that influences every board retrieved from the log. USNR's Extended Length Infeed (ELI) system ...

Forano Chip Screen Code: MA-46-E
USNR's Forano Chip Screen is a high capacity screen that allows your mill to take advantage of an important source of income: wood chips. The Forano chip Screen requires minimal maintenance, so you can spend your time and budget elsewhere.

Forano Disc Chipper Code: MA-32-EForanoDiscChipper
The USNR Forano Disc Shllipper is available in four sizes and three configurations to meet your specific wastewood processing requirements. Each model can also accomodate bottom, rear and top discharge for maximum flexibility.

Forano™ Carriage Code: MA-04-EForanoCarriage
Heavy Duty ConstructionUSNR's Forano Log Carriages continue a long-established tradition of superior construction that stands up to the most demanding sawmill environment.

GenII™ Gang Code: NM-MA-22-EGenIIGang
GenII is the next step in the evolution of shape sawing designed by the pioneers of optimized curve sawing technology. Newnes- McGehee’s GenII gang offers many improvements to this already proven technology.

High Strain Horizontal Bandmills Code: NM-MA-31-EHorizontalResawBandmills
Newnes-McGehee has developed simple high strain bandmills to meet any application for horizontal resaws. Thes bandmills offer hig accuracy and maximum production, yet the simple design assures minimum maintenance. They are available with 5' or 6' overhung wheels, and ...

High Strain Single Bandmills Code: NM-MA-29-ESingleBandmills
Newnes-McGehee has developed simple, yet multi-functional high strain bandmills for headrigs. These bandmills offer high accuracy and maximum production, yet the simple design assures minimum maintenance. They are available with 6' or 7' overhung wheels.

High Strain Twin/Quad Bandmills Code: NM-MA-30-ETwin-QuadBandmills
Newnes-McGehee has developed simple, yet multi-functional high strain bandmills to meet any application for double length infeeds, sharp chain systems and resaws. These bandmills offer high accuracy and maximum production, yet the simple design assures minimum ...

Horizontal Chipper System Code: MA-20-EHorizontalChipper
The Horizontal Chipper is a workhorse designed for high-production mills. Conical chip heads operate in the vertical plane which reduces side chipping forces, resulting in smoother feeding, better quality chips and longer-lasting knives.

HSS System Code: MA-07-EHSSSystem
Horizontal Shape Sawing SystemThe USNR Horizontal Shape Sawing (HSS) system is the next generation of curve sawing technology that solves many of the problems associated with traditional curve sawing machines, including issues with accurace, recovery, overfeeding ...

Knuckle Turner Infeed Code: MA-12-EKTI
Single Length Infeed with Integrated Log TurningThe USNR Knuckle Turner Infeed. With its small footprint, integrated log turning and accurate Slew / Skew positioning, this is the obvious choice for any small log line.

L&B Air Strain Bandmill Code: MA-08-ELandBAirStrainBandmill
King of Bandmills, the Letson & Burpee Air Strain Bandmill from USNR

LineMaster G3™ Code: OP-10-ELineMasterG3
Hardwood Lineal Edger OptimiserUSNR brings you the future of optimisation technology with the LineMaster G3™. Packed with features that ensure the highest fiber recovery with the ability to control the appearance of your products for maximum grade ...

Log Positioning Infeed Code: NM-MA-28-ELogPositioningInfeed
The log positioning infeed system accurately determines the shape of the log, calculates the highest-value cutting solution, then accurately rotates, positions and transports the log through the cutting tools.

MillExpert Edger Optimizer System Code: OP-18-EEdger
Full coverage, high-density 3D scanning for lineal and transverse applications

MillExpert Log Turner Optimiser System Code: OP-13-ELogTurner
Programmable Turn Increments Along with Risk and Stabilikty Analysis to Insure the Best Turn on Every Log

MillExpert Trimmer Optimizer System Code: OP-20-ETrimmer
Full coverage, high-density 3D scanning and many configurable options offer superior board control.Combining dense 3D scan data with the power of today's gigh-speed computers, the MillExpert Trimmer Optimiser lets you get the maximum value from every board. ...

MillWide Cant Optimizer System Code: OP-15-ECant
Combining dense 3D scan data with the power of today's high-speed computers, the MillWide Cant Optimiser system lets you get the maximum value from every cant. The complete solution indludes scanning, optimisation and information management along with full ...

MillWide Carriage Optimizer System Code: OP-16-ECARRIAGE
Simultaneous 3D front and back side scanning for hardwood and softwood applications.The LASARTM based MillWide Carriage Optimiser combines dense 3D scan data with the power of today's high-speed computers to let you get the maximum value from every log.

MillWide Control Systems Code: OP-07-EMillWideControlSystems
USNR Control Systems feature the extremely efficient Factory Wired System (FWS) of distributed I/OUSNR's Factory Wired System (FWS) is a revolutionary PLC system based on a distributed I/O system architecture. The system uses Allen-Bradley ControlLogix ...

MillWide End-Dogging Carriage Optimiser System Code: OP-21-EEDCCarriage
Simultaneous 3D front and back side scanning for hardwood and softwood applicationsThe LASARTM based End-Dogging Carriage optimiser combines dense 3D scan data with the power of today's high-speed computers to let you get the maximum value from every log.

Millwide Web System Code: OP-14-EMILLWIDEWEB
Data Mining and Distribution System Provides Instant Analysis of Profit and Loss Centers

MV Ring Debarker Code: MA-18-EMVRingDebarker
The USNR MV-Type Ring Debarker gives you excellent inline debarking performance in a great package. Our engineers have designed this debarker for maximum flexibility: our modular design means you get a custom machine at a non-custom price!

Norman Disc Chipper Code: MA-33-ENormanDiscChipper
The exclusive, tested design of the USNR Norman Chipper is bringing greater profits to chip manufacturers around the world. Truly uniform chips are the result of the USNR Norman Chipper’s continuous cutting action that makes it the only chipper of its kind!

Optimization from Bucking to Grading Code: NM-OP-01-EOptimization
Our comprehensive suite of integrated optimisation systems harnesses technology to create innovative solutions that satisfy today's requirements and set the stage to meet the challenges of tomorrow.

Optimized Curved Sawing Systems Code: NM-MA-01-EOptimizedCurveSawingSystems
Curve sawing offers increased value, higher volume recovery, longer length side boards, and stronger lumber. Today’s advanced systems meet the challenges in speed, accuracy and recovery.

Optimized Edger Systems Code: NM-MA-15-EOptimizedEdgerSystems
High performance edger systems offer fast, reliable and accurate sawing, while new technologies extend system capabilities to improve downstream processes.

Overview Code: GE-01-EOverview
USNR is a world leader in the design, manufacturing, and installation of state of the art machinery, dry kilns, control systems, optimisation software, and high-capacity lift trucks for the wood processing industry.

Profiling Curve Saw Gangs Code: NM-MA-13-EProfilingCurveSawGangs
Newnes-McGehee (NM) has expanded its range of curve sawing equipment to include side profiling of the jacket boards. This machine functions with any of our 3 system feed configurations: Linear, Transverse or QuickScan.

Quad Arbor Saw Box Code: MA-23-EQuadArborSawBox
USNR's Quad Arbor Sawbox is a circular saw alternative to a quad bandmill that features the new Even Depth of Cut (EDC) technology. This innovation alleviates many of the problems commonly associated with the typical fixed arbor sawboxes.

RoboGang™ Curve Sawing Gang Code: NM-MA-23-ERoboGang
RoboGang is the next step in the evolution of shape sawing designed by the pioneers of optimized curve sawing technology. The RoboGang concept allows high speed shape sawing in both horizontal and vertical orientation.Newnes-McGehee has applied a new concept to ...

Rotary Hog Code: MA-31-ERotaryHog
When it comes to shredding waste material, there just isn’t any better value than USNR’s Rotary Hog. These rugged machines provide maximum production at the lowest cost per ton.

Sawmill BioScan System Code: NM-OP-06-ESawmillBioScanSystem
Trimmer and Edger Defect ScanningHighest value optimized decisions with proven grade and recovery performance based on visual defect detection, rules based classification and highly accurate geometric measurements.

Self-Centering Infeed Conveyor Code: MA-47-ESelf-CenteringInfeedConveyor
The self-centering infeed conveyor is a proven and effective method of centering the log to the debarker. The machine positions the log in both the horizontal and vertical planes, centering the log based on diameter, not weight. This enables it to maintain a true ...

SGII Charger Table Code: NM-MA-19-ESGIIChargerTable
The Super-GII charger table is the center piece of the Newnes-McGehee optimised transverse edger line. It positions flitches accurately at very high cycle rates. The positioning system eliminates edge crush to maximise recovery.

SL2500 Small Log Processor Code: NM-MA-14-ESL2500SmallLogProcessor
Newnes-McGehee (NM) small log processing systems offer production rates and accuracy for today's competitive processors. As a single source supplier, NM provides and supports true shape scanning, intuitive controls and robust mechanical components in fully ...

Smart TriCam™ Transverse Scanning System Code: OP-05-ESmartTriCamTransverse
Most accurate and highest-density 3D transverse scanning system in the industry

Super Chip Screen Code: MA-19-ESuperChipScreen
The USNR Super Chip Screen makes a great addition to your mill to take advantage of an important source of income: wood chips. The Super Chip Screen requires minimal maintenance, so you can spend your time and budget elsewhere.

TrimMaster G3™ Code: OP-11-ETrimMasterG3
Hardwood Trimmer OptimiserUSNR brings you the future of optimisation technology with the TrimMaster G3™. Packed with features that ensure the highest fiber recovery with the ability to control the appearance of your products for maximum grade and ...

Trimmer Positioning Fence & Transfer Code: NM-MA-08-ETrimmerPositioning
The Newnes-McGehee (NM) Trimmer Positioning Fence positions lumber accurately at very high speeds before it enters the Trimmer.

True Flow Knife System Code: MA-10-ETrueFlowConical
Conical Chipper Head Knife USNR's True flow high-performance knife system is an outstanding alternative for either drumstyle or conical chipper heads.

True Flow Knife System Code: MA-11-ETrueFlowDrum
Drum-Style Chipper Knife USNR's True Flow high-performance knife system is an outstanding alternative for either drum style or conical shipper heads. The True Flow knife system was designed using sophisticated 3D solid modeling CAD software, resulting in a ...

USNR Lunden Stacker Code: MA-02-ELundenStacker
The USNR Lunden Stacker is the original automatic sticker stacker, imitated by many, but matched by none. The Lunden Stacker System features stickers on the stacker forks and lumber on the stickers when the carriage cycles. This results in packages of great ...

Vee-Chipper Canter System Code: MA-13-EVeeChipper
USNR's Vee-Chipper Canter System continues a long-established tradition of bullet-proof construction that stands up to the most demanding operating cycles. This machine will stand up to the abuse of volume production for many years to come!

Vertical Single / Double Arbor Gangs Code: NM-MA-21-EVSA-VDAGang
Newnes-McGehee has developed VSA/VDA gang systems to fit any gangsaw application. Built in the traditional McGehee fashion, these vertical gangsaws are rugged, with easy to maintain and operate features. The many options offer customization to suit any ...

VSS System Code: MA-09-EVSSSystem
Vertical Shape Sawing SystemThe VSS cuts along an optimised path to get the greatest number of high-quality boards out of every log. The VSS follows the wood grain more accurately, resulting in higher quality lumber than a straight sawing system. You also ...

WaneMaster G3™ Code: OP-12-EWaneMasterG3
Hardwood Edger OptimizerUSNR brings you the future of optimisation technology with the WaneMaster G3™. Packed with features that ensure the highest fiber recovery with the ability to control the appearance of your products for maximum grade and value.

WinTally Code: NM-MA-16-EWinTally
WinTally™ is Newnes-McGehee's solution for sorter management in the sawmill and planermill. Production information is captured by WinTally™ as boards pass into the sorter and arrages data into an organized and logical dtabase. Information ...

YieldMaster G3™ with Stereo Scan™ Code: OP-01-EYeildMasterG3
Hardwood Carriage Optimiser.The YeildMaster G3™ system scans and tapers each log precisely according to the grade and targeted products specified by the sawer using our patented StereoScan™ 3-D scanning for headrig carriages.

Used Equipment - Sawmills

36 Stenner Bandsaw VHE Code: 1308
36" Stenner Bandsaw VHE, G & C Machine - Self Centring, Hydraulic Feeding.

36 Stenner Resaw VHL Code: 1348
Two 36" VHL Resaws in good condition available.

Almab incl automatic sticker handling - SOLD Code: 3035
Almab sticker stacker incl. complete automatic sticker handling. Two unscramblers, even end roller conveyor, single piece feeder, roller conveyor for two even ends, chain conveyor and forks for layers, automatic sticker handling, outfeed conveyor for pac

Almab Trimmer Code: 3036
Almab trimmer with 6 saw blades. The trimmer is to be placed on the left hand side when looking in the feeding direction.

ARI reducer circular saw line Code: 3010
ARI reducer circular saw line with ARI SKR-KS 12 reducer – twin circular saw, ARI BKR chipper canter, ARI DS 74 + 1 multi rip saw and 2 ARI KT 5 board edger incl. SAAB WOOD Edgar optimizer. Capacity appr. 60,000 m3 sawn timber per year in one shift (8 hours).

Armstrong Bandsaw Sharpener 2 SLH No.2. Code: 2117

Bruks 700 LTLT Butt end reducer Code: 3014
Bruks butt end reducer type RR 700 LTLT. Incl. electric control cabinet and operators desk. This is a through feed machine. Log length: min 3,2 m - max 6,2 m. Max log diameter: 700 mm, measured 1500 mm from the butt end

Bruks 812CS Drop Feed Drum Chipper Code: 2191
Efficient machines for chipping of short wood waste, such as trim ends, lily pads, joinery waste, veneer, and plywood, as well as for re-chipping. The combination of drop feed and excellent cutting geometry for short pieces gives you a better chip quality than what you ...

Bruks 820 CM Chipper Code: 2185
BRUKS stationary drum chippers are processing different kinds on input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

Bruks 820 CM Chipper Code: 2184
BRUKS stationary drum chippers are processing different kinds of input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

Bruks RR 1000 C4 V6R Butt end reducer Code: 3016
Bruks butt end reducer typr RR 1000. incl. electric control cabinet. Max log diameter: 700 mm measured 1500 mm from the butt end. Log length: 3,0-7,5 m. Max butt end diameter: 980 mm

Cambio 70-66 BA Code: 3013
Reconditioned Cambio 66 BA with hydraulic dampers. Driveunit with new chain, sprockets, shafts and bearings. New rotor bearing. New toolholders, tools Söderhamn Camtool, all new bearings and sealings. Feedwork with new feed rollers, reinforced hubs, new gear kit ...

Cambio 71-45 CA Code: 3017
Reconditioned Cambio 71-45 CA debarker with hydraulic dampers. New rotor bearing, toolholders, Iggesund Tools. New bearings and sealings. Feedwork with new feed rollers. New hydraulic assambly for dampers.

Cambio 71-75 Debarker Code: 2182
This is a heavy duty high capacity debarker.

Canter 240 - SOLD Code: 3043
Canter 240 is intended for the plane reduction of logs ahead of sawing machines. It may also be used for the production in one machine of timbers and sleepers.

Erjo 165 SN Chipper Code: 2180
The ERJO chipper type 165 SN is gravity fed rotor chipper for production of fuel chips from all kinds of wood residues.

ERJO 204 MA Chipper Code: 2128
Type: ERJO 204 MA - Capacity: 8-15, 15-25 - Kw: 55 The ERJO 204 MA is especially designed to produce pulp and board chips of hard-to-handle sawmill waste. I.e. edgings, slabs, trimmings and tops, ERJO 608 MA can also produce fuel chips.

ERJO 235TS Chipper Code: 2190

Euromill profiling line Code: 3008
Small log line complete with log intake, curve turner for logs and Cambio 66 AirTen debarker. Saw line with Söderhamn 240-12 chipper canter, Söderhamn EUROMILL profiling unit. Separate stacker for centre pieces. Traysorter, trimmer and stacker for boards.

Fulghum Chipper Code: 2189

Göckel G40 knife grinder - SOLD Code: 3030
Göckel type G40 knife grinder. Grinding length: 900 mm. In addition a separate magnetic table, grinding length: 600 mm

Incomplete ARI Sawline Code: 1301
Incomplete ARI Small Logline, Available immediately. Sawline includes:

Infeed Conveyor KSI-5 Code: 2109
KSI-5 is an infeed conveyor for primary breakdown machines. KSI-5 consists of two units, loading conveyor and aligning conveyor.

Kasto Horizontal Bandsaw Code: 2121
Horizontal Bandsaw

Klamath 7' Bandmill Code: 1311

Log Deck Code: 3020
Log deck with 4 chains.

Log Haul Code: 3021
Log haul incl. electrical motor and gear. Length appr. 40 m.

Log infeed conveyor type Remill 450 Code: 3022
Log infeed conveyor type Remill 450

Log Loader with Cams Code: 1318
Log Loader with Cams

Log Metal Detector QSDM 111 - SOLD Code: 2127
With ABB Industrial Systems's metal detector QSDM111, the presence of foreign objects can be detected in a variety of materials.

Nicholson 54" Debarker Code: 1317
Nicholson 43" Model 'A;. Built in 1954, retrofitted with Nicholson 54" ring in 1992

Prescott 5' Bandmill Code: 1312

Renholmen Dry Sorting Line Code: 3039
Renholmen sorting and stacking line for dried timber. Complete with intake for packages, Dynagrade stress grading unit, 2 grading stations, 30 pockets, stacker, press and strapping equipment.

Saw mill for small logs Code: 3007
Sawmill with log sorting 2x5 pockets. Saw line with Söderhamn chipper canter and ARI Vislanda circular split saw. Stacker and conveyor for waste handling. Electric, electronic, pneumatic and hydraulic equipment.

Söderhamn 240-12 chipper canter Iggesund Code: 3023
Söderhamn chipper canter type 240-12 with Iggesund Tools canter heads. The heads are equipped with Iggesund turn knife system. Max log diameter: 500 mm. Min log length: 2,5 m. Max opening between discs: 400 mm

Söderhamn ARI Saw Mill Code: 3006
Complete saw mill with log sorting line 2x8 pockets. Saw line with two Söderhamn 240-12 chipper canters and ARI single split saw. All conveyors for waste handling. Combi sorting line for dry and green timber.

Söderhamn Linck Profiling line Code: 3004
Söderhamn Customill reducer bandsaw with Link profiling unit type VP 34 and Link Multi Ripsaw type MKV. Söderhamn board edger type 5100 incl. in and outfeed system. Capacity appr. 90,000 m3 sawn goods per year in one shift (8 hours).

Söderhamn Reducer Bandsaw Line Code: 3011
Complete saw mill incl. log sorting, Söderhamn reducer bandsaw line and combi sorting line. Capacity appr. 40,000 m3 sawn gods per year in one shift (8 hours).

Söderhamn reducer bandsaw mill Code: 3005
Complete Söderhamn reducer bandsaw mill. Saw mill incl. log sorting 2x18 pockets, electrical and electronic equipment. Log intake to saw mill with Cambio 66 debarker.

Söderhamn sawmill with green, dry and log sorting Code: 3003
Complete sawmill with log sorting, Söderhamn reducer band saw line, green sorting line, stacker and dry sorting line. Capacity appr. 35,000 m3 sawn timber per year in one shift (8 hours)

Soderhömn 240-12 No 68 858 Code: 3024
Söderhamn chipper canter type 240-12 with 2 spiral discs. Max log diameter: 500 mm. Min log length: 2,5 m. Max opening between discs: 400 mm. Canter discs can be replaced with other types when available.

SOLD - 2 Stage Lower and Upper Board Un-Scrambler - SOLD Code: 1326
2 Stage lower and upper board un-scrambler, 4400mm (W) x 2200mm (L), complete with spiral rollcase, 5 roller, 3500m (L) x 1300mm (W), 4 transfer decks, 5 strand, 2900mm (W) x 8500mm (L), Tong feeder system

SOLD - 31 Bin Sorter, 120 pieces per minute - SOLD Code: 1331
31 Bin sorter, 120 pieces per minute, thickness 15.5mm to 150mm, Length capacity 1800mm to 3600mm, Overall dimensions x 45000mm x 3000mm, 20hp hydraulic power-pack, 5 x 6 strand takeaway chain lines, 60 metres total length, Control cabinets and consoles

SOLD - Armstrong Bandsaw Stretcher Roll - Super 4 - SOLD Code: 1327
Bandsaw stretcher roll, Armstrong, Model Super 4, Serial No. 456SDSR-9, 300mm x 1220mm steel plate, 100mm thick, motorised, 3 phase with overhead Work light and 15 amp GPO

SOLD - Armstrong Bandsaw Stretcher Roll, - Model 5 14 - SOLD Code: 1328
Bandsaw stretcher roll, Armstrong, Model 5 14, 300mm x 1220mm steel plate, 100mm thick, motorised, 3 phase with overhead work light and GPO

SOLD - Armstrong Varisharp No. 4 LH - SOLD Code: 1330
CNC Bandsaw Sharpener Armstrong, Varisharp, No. 4 LH, Serial No. Vsharp 76, Armstrong CNC control unit 5GX

SOLD - Armstrong Varisharp No. 4811 - SOLD Code: 1329
CNC Bandsaw Sharpener Armstrong, Varisharp, No. 4811 Serial No. Vsharp 75 Armstrong CNC control unit 5GX

SOLD - Chipper Canter & Quad Bandsaw Including Board Separator - SOLD Code: 1324
T.S. Manufacturing and Saw Quip, chipping canter, Quad bandsaw Including board separator line comprising continuous sharp chain, 25000 x 64mm, twin turning and skewing rollers, Saw Quip chipping cater heads, Saw Quip high strain Quad bandsaw, 8 x 5ft diamter sheels, 4 ...

SOLD - Debarker Outfeed System - SOLD Code: 1322
Debarker outfeed system comprising of spiked roller. Outfeed rubber belt conveyor approximately 14000 x 450mm, 3 pneumatic sink kick sweepers. Jack ladder style inclined log deck, 3500mm x 4200mm 4 strand, pneumatic log singulator, excludes sub-frame

SOLD - Edger Optimizer - SOLD Code: 1338
T.S. Manufacturing edger system comprising of 5 strand 2600mm (W) x 1850mm board return landing, transfer deck, 6 strand, 4300mm (L) x 3600mm (W), set of 5 spiral rolls with ending chain, 4 strand, 5 strand, 2900mm (W) x 1200mm (L) transfer deck, 5 strand, 4200mm (L) x ...

SOLD - Incline Deck - SOLD Code: 1337
T.S. Manufacturing clean board receiving deck, inclined deck 5 strand, 3000mm (W) x 9000mm (L), with 5 pneumatic kickers, powered by 3 phase electric motor, with 600mm to 100m legs

SOLD - Quad Bandsaw System - SOLD Code: 1325
T.S. Manufacturing and Saw Quip quad bandsaw resaw system

SOLD - Rubber Belt Conveyor - SOLD Code: 1341
Rubber belt conveyor, 32000 x 600mm, Powered by 3 phase electric motor

SOLD - Stenlunds Knife Grinder B1125 - SOLD Code: 2115
Knife Grinder

SOLD- ISELI Tipping Machine SAM - SOLD Code: 2181
Semi Automatic stellite tipping machine.

Swecan Reducer bandsaw mill Code: 3012
Swecan reducer bandsaw mill with 2 Swecan chipper canters type 1620-35-EF and a total of 11 Swecan bandsaws type QPL55-RS. Capacity appr. 75 000 m3 sawn timber per year in one shift (8 hours)

Tray Sorter - SOLD Code: 3034
Tray sorter with 10 trays. Even end infeed roller conveyor. Infeed chain conveyor. Board elevator for feeding boards into trays. outfeed chain conveyor collecting boards from the trays. Electrical equipment.

TS Manufacturing Vibratory Conveyors x 3 Code: 2188
Total length approx 52 metres x 600mm (w).

Two Axis x-y Curtain Scanner Code: 1314

Vibrating conveyor Code: 3038
Vibrating conveyor manufactured by Gösta Hedlund AB. Length: 8 m. Width: 400 mm.

Vollmer CAB 42U + EMS Code: 3031
Vollmer CAB 42U grinding machine for bandsaw blades incl. EMS side dressing machine. Blade width: 60-210 mm. Blade length: 6-11 m. Tooth pitch infenitely adjustable: 6-60 mm. Tooth depth: 4-25 mm. Feed speed: 30 teeth per minute. Grinding wheel: dia

Vollmer Original VWM40U and VRB/1 Code: 2119

Vollmer Original, Side and Front Grinder Code: 2183
Original Vollmer, Side and Front Grinder, Stenbergs. Can sell together or separately.

Vollmer PMH Code: 3032
Automatic swaging and side dressing machine for bandsaw blades. Incl. supporting stands. Blade width: 130-420 mm. Tooth pitch: 20-100 mm. Tooth depth: min 8 mm. Blade thickness: 0,7-3,5 mm.

Vollmer VWM VRB Code: 3033
Roll saw stretcher and tensioning bench for tensioning and levelling of bandsaw blades. Max width: 230 mm. Blade length: 6,3-8,5 m.

Vollmer Werke PMH Code: 2118

WSM Hogger - Refurbished Code: 2187
West Salem Machinery Hogger Model 2432B Serial No. 5901104

5' L&B Resaw 7 Code: 1305
LETSON & BURPEE (USNR) 5' MOVING BAND MILL

ARI KL 13 Slab Resaw Code: 3067
ARI tupe KL 13 slab resaw. Max saw blade diameter: 1,300 mm. Hydraulic drive of feed and fence rollers. Incl. main electrical motor and hydraulic power pack.

Bin Sling Sorter & 2003 Stacker for 8' Wide Packages Code: 1361
Sling Sorter: 48 bays sling sorter, pusher lug 1992 Bottom chain transfers Stacker: 20' Huot, high speed stacker single forks 2003, 8' wide green packages

Bruks Chip Screen Type BS 32/3 Code: 3056
Bruks chip screen type BS 32/3. Incl. steel frame with wires. Averages capacity = 60 m3 chips/h. Top capacity = 100 m3 chips/h. Screening area for chips, upper deck = 5 m2. Screening area for saw dust, lower deck = 3,1m2. Electrical motor 4 kW.

Bruks Feed Hopper Code: 3074
Bruks feed hopper with hydraulic dive, 3 kW. Volume: 6 m3.

Bruks Idler Roller Conveyor 600mm Code: 3060
Bruks idler roller conveyor. Complete with gear and motor. Length = 39 meter. Width = 600 mm.

Bruks Idler Roller Conveyor 800mm Code: 3059
Bruks idler roller conveyor, complete with gear and motor. Length = 11 meter. Width = 800 mm.

Bruks RR1000 Butt End Reducer Code: 3053
Bruks RR 1000 butt end reducer. Max butt end diameter: 980 mm. Max log diameter: 700 mm measured 1500 mm from the root end. Min log length: 3,2 meter. Max log length: 7,5 meter. Capacity: 4-7 logs per min.

Bruks Scraper Conveyor Code: 3069
Bruks scraper conveyor. Length: 18 meter. Width: 500 mm. Complete with drive unit.

Bruks Tubulator TT 500 Conveyor Code: 3058
Bruks Tubulator TT 500 Conveyor. Length = 45 meter. Width = 500 mm. Capacity = 400 m3s / hour. Feed speed max 150 m/min. Length of each section = 6 meter.

Bruks Vibrating Conveyor Code: 3071
Vibrating conveyor made by Bruks. Length: 24 meter. Width: 450/650 mm. Incl. metal detector and built in screen.

Brunette MKV-35 Debarker Code: 1310
Heavy duty main frame - RH One piece frame construction Eight feedrolls Four feedroll air cylinders

Cambio 70-66 AirTen Code: 3050
Reconditioned. Hydraulic dampers. Cassette feed arms. New rotor bearing.

Cambio 70-66BA - Cleaned, Checked & Painted Code: 3041
Cleaned, Checked & Painted

Canter-Twin Sawline Code: 1362
Canter-Twin Sawline: Kockums 6' Twin band saws 1981 shop rebuilt by USNR in 2005

Carriage Head Rig Code: 1356
Albany 1976/Cleerman 2007, 4 knees, temposonics, new in 2007, ran until 2008.

Chipper Board Edger Code: 3076
Chipper board edger Söderhamn type 519 incl. Söderhamn Type 516. Max inlet width: 600 mm. Min edged width: 50 mm. Max edged width: 380 mm. Max board thickness at 90 m/min: 50 mm.

Complete Sawmill Code: 1363
Complete sawmill. Can sell seperately (see items 1356 to 1362).

Erjo 120 VS 456 Code: 3055
Erjo 120 VS 456 drop feed chipper for edgings, slabs and trimmings. Excl. motor. Drum diameter 120 cm. Drum width 45 cm. 6 knives. The chipper is reconditioned.

ERJO 200SN Chipper Code: 2101
Produces uniform sized fuel chips from: Woodwates, veneer, particle board, hardboard, plywood etc

Erjo 204 MA 450 Code: 3054
Drop feed chipper type Erjo 204 MA 450. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Reconditioned. Electrical motor 55 kW. 4 knives. Capacity appr. 15-25 m3 chips/hour.

Erjo Feed Hopper Type M10 Code: 3073
Erjo feed hopper type M10. Electric drive 1,5 kW. Capacity 10-30 m3/h.

Gunnarssons 5m Multisaw Trimmer Code: 1354
Gunnarssons 5m Multisaw Trimmer Model JV190 Still operational until early 2010.

IWD Tital VK-10 Strapping Machine Code: 2186
Strapping Machine, Height 3400mm - Width 2100mm

Jaymor Metal Detector Code: 2195
Jaymor Industries Ltd manufacture heavy duty industrial metal detectors to suit the individual customer's needs. The Jetscreen Metal Detector range will positively identify tramp metal before any damage is done further down the line.

LH Coe 20' Optimised 3 Saw Edger Code: 1357
Left hand Coe, 20' optimized 3 saw edger comes with reman head, 1996 200hp top arbor, 200hp Top Chipping Head. Coe Detec Scanner Automatic Board Tailer

LH Optimized Trimmer Code: 1360
Left Hand Optimized Trimmer: Single board unscrambler 2000 Newnes Revolver lug loader 2000 PHL Industries 20' high speed trimmer 2000 comes with 11 motorized saws 7.5hp (saws ajustable - see pics - note pic for motor specs) D-TEC 20' optimization, scanner DTec ...

Lindsaw Resaw Type CR8 Code: 3057
Single split resaw made by Lindsaw. Type CR 8 incl. in feed conveyor. Max saw blade diameter = 800 mm. Max cutting height = 300 mm. 30 kW electrical motor.

Log Debarker Infeeder - New Code: 3052
New log infeed conveyor suitable for logs up to diameter 450 mm. Complete with drive unit and hydraulic power pack. Feed speed 60 m/min.

Log Haul Hedlunds Code: 3062
Log haul manufactured by Hedlunds. Length: appr. 16 meter. Double chain with dogs. Has been in production appr. 1 year only.

Log Haul Söderhamn Code: 3070
Log haul Söderhamn. Length: 14 meter. Width of dogs: 350 mm.

Log Haul With One Side Kicker Code: 3061
Log haul with one side kicker. Length = 9 meter. Complete with gear and motor. Manufactured by Gösta Hedlund AB.

Newnes Optimized Board Edger RH Code: 1359
Right Hand, Newnes 20' optimized 3 saw edger comes with reman head, 1998, Newnes Scanner, updates 2004, 30" wide retec, 900 FPM, could be faster but top chip head limits, 20" diameter saw. Top Arbor, 200HP, Chip head 200HP Scanner serial # 98-281-DO, Scanner Model ...

Newnes Scanner, Trimmer, Bin Sorter for sawmill & planermill Code: 1302
1992 Newnes Trimmer Optimiser, Bin Sorter & Stacker. The equipment was installed new in 1993 and then retired in 2004 - the mill had planned to relocated it - but this never happened. This equipment and building sits in the middle of the yard and since 2004 has not ...

Optimized Docker Code: 1355
C14_MKL CNC cross-cut system.

Rens Metal Detector Code: 2194
Rens L240 Control Instrument has proven itself in hundreds of installations in the United States, Canada and in other countries.

Soderhamn Centering Infeed Code: 3065
Centering infeed made by Söderhamn Eriksson. The infeed is suitable for cants.

Söderhamn Infeed Conveyor Type 447 Code: 3066
Infeed conveyor Söderhamn type 447 for installation in front of reducer band saw, band saw , reducer circular saw or chipper canter and cantfeed either round logs or cants. It has a cebtering and log turning function and consist of 2 sections, one log feeder and one ...

SOLD - 2006 Autolog True Shaper Scanner and Optimization System - SOLD Code: 1323
2006 Autolog True Shaper scanner and optimization system. Full 3D scanner using Hermary LPS2016 head. Control Logix PLC front end mill system, autolog optimized edger system, CUP board

SOLD - Auger Saw Dust Conveyors x 3 - SOLD Code: 1344
3 x Auger saw dust conveyors, 1 x 150mm diameter, 2 x 200mm diameter approximately 14 metres in overall length, powered by 3 phase electric motors

SOLD - Edger Outfeed System - SOLD Code: 1339
Edger tailer outfeed system with 2 linear positional gates, rubber belt conveyor 32000 x 480mm with 1000mm support legs, powered by 3 phase electric motors

SOLD - Grading & Trimming Line - SOLD Code: 1335
Grading and trimming line comprising 5 strand, 2600mm (W) x 15000mm (L), grading table, Overhead autolog laser scanner, 4 even end rolls with automatic length adjustment, pneumatic trim saw, Control console (Note: PLC controls to be removed from cabinet)

SOLD - Incline Airmax Rubber Belt Trough Conveyor - SOLD Code: 1346
Inclined Airmax Rubber belt trough conveyor, Approximately 150 metres x 600mm, Steel support legs to 6000mm (H), colour bond enclosure, emergency stop cable, approximately 7000mm, Steel support structure with 2 way directional off load chute, Powered by 3 phase ...

SOLD - Mild Steel Chip Cyclone - SOLD Code: 1340
Mild steel chip cyclone, 1800mm (H) x 1500mm diameter, bottom outlet

SOLD - Newnes Curve Sawing 12 Double Arbor Gang Edger - SOLD Code: 1358
Optimization by Newnes 1998, updated in 2004, transverse scanning system.

SOLD - Newnes Edgers 1993 - SOLD Code: 1303
2 Complete Systems. When these edgers operated (1994 to 2004) the program for the mill was heavy to 4x4 and 4x6.

SOLD - Pneumatic Automatic Cut Off Saw - SOLD Code: 1334
Pneumatic automatic cut off saw, Up cut, Complete with 4400mm (L), 350mm Rubber belt conveyor and offcut chute

SOLD - Rubber Belt Conveyor - SOLD Code: 1342
Rubber belt conveyor, 70000 x 450mm, Powered by 3 phase electric motor, includes safety lanyards x 2

SOLD - Rubber Belt Conveyor - SOLD Code: 1345
Rubber belt conveyor, approximately 45000mm x 400mm mounted on steel legs, powered by 3 phase electric motor

SOLD - Rubber Belt Conveyor - SOLD Code: 1343
Rubber belt conveyor, 6200 x 280mm, Powered by 3 phase electric motor

SOLD - Sorter Infeed Transfer Deck - SOLD Code: 1336
Sorter infeed transfer deck, 5 strand, 14500mm (L) x 3000mm (W), mounted on 900mm support legs, complete with 2 overhead infeed decks, 5 strand, 1800mm (W) x 4000mm (L), inclined transfer deck, 5 strand 4400mm (L) x 2400mm (W) on 1000mm support legs, Powered by 3 phase ...

SOLD - VK 550 Cambi 2R - SOLD Code: 3051
Valon Kone debarker type 550 Combi 2R incl. self centering in feed conveyor.

Tongariro Chip & Sawdust Bins Code: 1364
Sawdust Bin · Length – 6.7m Chip Bin · Length – 9.2m

Valmet Trimmer Code: 3042
Valmet trimmer with 5 saw blades. The trimmer is to be placed on the right hand side when looking in the feeding direction.

Vibrating Conveyor GVC Code: 3063
Log haul manufactured by Hedlunds. Length: appr. 16 meter. Double chain with dogs. Has been in production appr. 1 year only.

Vibrating Conveyor Hammars Code: 3064
Hammars vibrating conveyor type Syncro Sher. Length = 8 meter. Width = 450 mm (bottom), 600 mm (top). Complete with drive unit.

Vollmer CA 300 + CBF Side Grinder - SOLD Code: 3068
Vollmer CA 300 automatic grinding machine for band saw blads incl. Vollmer CBF 300 side grinder.

New Equipment - Boilers & Kilns

Hardwood Package Dry Kilns Code: DK-02-EHardwoodPackageKiln
With more than a century of experience in lumber rying, USNR is the clear choice for Hardwood Dry Kilns. Some of the industry leading features you find on our hardwood dry kilns are listed below:Durable and ReliableComplete Drying controlFlexible to Fit Your Needs

High Temperature Track Kiln Code: DK-05-EHighTempTrackKiln
USNR Irvington-Moore dry kilns are improving efficiency and increasing profits in operations like yours throughout the world. We've been manufacturing kiln drying systems for over 100 years, and we can show you how to ad the real profits that come from quality kiln ...

Kiln Boss Computer Control System Code: DK-04-EKilnBoss
USNR's Kiln Boss systems allow you to easily control all important wood drying variables. The system tracks your custom drying schedules, alerts you to trouble or system changes, and reports batch and historical statistics for your review.

Load Boss - In-Kiln Weight Scale System Code: DK-03-ELoadBoss
Adding the USNR Load Boss to your lumber drying operation gives you another level of control. The Load Boss System uses sensitive electronics to precisely measure the weights of sample boards distributed within your lumber stack. The Load Boss gives you the ...

Sloped Grate Green Burner Code: DK-06-EGreenBurner
USNR-Irvington-Moore presents the Sloped Grate Green Sawdust Burner with Turbo Technology™ which allows you to get the economy of direct-fired dry kilns and the clean performance of steam-heated dry kilns, all in one package.

Triple-Length Continuous (TLC) Kiln Code: DK-01-ETLCKiln
USNR continues its tradition of innovation with the Triple-Length Continuous (TLC) Dry Kiln. This unique new concept in drying technology delivers continuous non-stop production, enabling you to increase your kiln production by up to 50%, while using your existing ...

New Equipment - Planermills

Accu-Trim Trimmer Code: MA-05-EAccu-TrimLineShaft
The USNR Accu-Trim Line-Shaft Trimmer is one of the most robust trimmers on the market with the ability to position saws at one-foot increments. The Accu-Trim Line-Shaft Trimmer has a proven track record achieving 160+ LPM in sawmills and 200+ LPM in planermills.

Beam Style Tilt Hoist Code: NM-MA-24-ETiltHoist
The Newnes-McGehee beam style tilt hoist is made with heavy duty knees and is designed and constructed for rugged use. It features an hydraulic cylinder hoist for precise indexing of packages without mechanical clutches or brakes.

Bin Sorter Code: MA-03-EBinSorter
Drag Chain, J-Bar and Pusher LugUSNR Bin Sorters feature smart, flexible designs that can be customized to handle a mill's specific needs. USNR Bin Sorters are available in three styles: Drag Chain, J-Bar and pusher Lug. All USNR Bin Sorters are ...

Grade Station Systems Code: NM-MA-12-EGradeStationSystemsa
Newnes –McGehee’s Grade Station system offers “hands free” grading eliminating fatigue and injury from carpal tunnel syndrome.Boards are lifted out of a lug, parked in front of the grader momentarily, then turned and parked once again. Graders ...

Hi-Speed Stacker Code: NM-MA-07-EHi-SpeedStacker
The hi-speed stacker pre-stages the lumber tiers, separating the tier dividing action from the stacking fork movement. This allows the stacker fork motion to be controlled smoothly, even at very high speeds.

Hydraulic Endpress Code: NM-MA-26-EEndpress
Newnes-McGehee's hydraulic endpress is available in several designs to suit various flow plans and operating systems,

LHG E-Valuator™ Module Code: NM-OP-04-ELHGE-Valuator
Board vibration measurment combined with proven X-ray density measurments provides MSR evaluation with more acurate Modulus of Elasticity (MOE) predictions and greater yields.