Sawmilling

Bio Fuel

Bulk Handling

Spare Parts

Projects

My Account

Shopping Cart

Site Search

Category:





Keyword:

Would you like more information emailed to you on any of these products?

Place a check mark next to the items you are interested in and submit the form below.

Your Name:
Phone Number:
Email Address:
Company Name:
Address:

CONTACT US

Name: Geoff Strang
Email:
geoff@skookum.co.nz
Ph: +64 9 276 2402
Cell: +64 274 304 981
Web:
www.skookum.co.nz

Category: Sawmilling > Used Equipment > Sawmills

Complete Sawmill

ARI reducer circular saw line Code: 3010
ARI reducer circular saw line with ARI SKR-KS 12 reducer – twin circular saw, ARI BKR chipper canter, ARI DS 74 + 1 multi rip saw and 2 ARI KT 5 board edger incl. SAAB WOOD Edgar optimizer. Capacity appr. 60,000 m3 sawn timber per year in one shift (8 hours).

Euromill profiling line Code: 3008
Small log line complete with log intake, curve turner for logs and Cambio 66 AirTen debarker. Saw line with Söderhamn 240-12 chipper canter, Söderhamn EUROMILL profiling unit. Separate stacker for centre pieces. Traysorter, trimmer and stacker for boards.

Incomplete ARI Sawline Code: 1301
Incomplete ARI Small Logline, Available immediately. Sawline includes:

Saw mill for small logs Code: 3007
Sawmill with log sorting 2x5 pockets. Saw line with Söderhamn chipper canter and ARI Vislanda circular split saw. Stacker and conveyor for waste handling. Electric, electronic, pneumatic and hydraulic equipment.

Söderhamn ARI Saw Mill Code: 3006
Complete saw mill with log sorting line 2x8 pockets. Saw line with two Söderhamn 240-12 chipper canters and ARI single split saw. All conveyors for waste handling. Combi sorting line for dry and green timber.

Söderhamn Linck Profiling line Code: 3004
Söderhamn Customill reducer bandsaw with Link profiling unit type VP 34 and Link Multi Ripsaw type MKV. Söderhamn board edger type 5100 incl. in and outfeed system. Capacity appr. 90,000 m3 sawn goods per year in one shift (8 hours).

Söderhamn Reducer Bandsaw Line Code: 3011
Complete saw mill incl. log sorting, Söderhamn reducer bandsaw line and combi sorting line. Capacity appr. 40,000 m3 sawn gods per year in one shift (8 hours).

Söderhamn reducer bandsaw mill Code: 3005
Complete Söderhamn reducer bandsaw mill. Saw mill incl. log sorting 2x18 pockets, electrical and electronic equipment. Log intake to saw mill with Cambio 66 debarker.

Söderhamn sawmill with green, dry and log sorting Code: 3003
Complete sawmill with log sorting, Söderhamn reducer band saw line, green sorting line, stacker and dry sorting line. Capacity appr. 35,000 m3 sawn timber per year in one shift (8 hours)

Swecan Reducer bandsaw mill Code: 3012
Swecan reducer bandsaw mill with 2 Swecan chipper canters type 1620-35-EF and a total of 11 Swecan bandsaws type QPL55-RS. Capacity appr. 75 000 m3 sawn timber per year in one shift (8 hours)

Complete Sawmill Code: 1363
Complete sawmill. Can sell seperately (see items 1356 to 1362).

Log Handling & Processing

Log Haul Hedlunds Code: 3062
Log haul manufactured by Hedlunds. Length: appr. 16 meter. Double chain with dogs. Has been in production appr. 1 year only.

Log Haul Söderhamn Code: 3070
Log haul Söderhamn. Length: 14 meter. Width of dogs: 350 mm.

Log Haul With One Side Kicker Code: 3061
Log haul with one side kicker. Length = 9 meter. Complete with gear and motor. Manufactured by Gösta Hedlund AB.

Log Handling & Processing - Log Decks & Conveyors

Log Deck Code: 3020
Log deck with 4 chains.

Log infeed conveyor type Remill 450 Code: 3022
Log infeed conveyor type Remill 450

Log Loader with Cams Code: 1318
Log Loader with Cams

Log Metal Detector QSDM 111 - SOLD Code: 2127
With ABB Industrial Systems's metal detector QSDM111, the presence of foreign objects can be detected in a variety of materials.

Log Handling & Processing - Log Rotators

Log Haul Code: 3021
Log haul incl. electrical motor and gear. Length appr. 40 m.

Log Handling & Processing - Debarkers

Bruks 700 LTLT Butt end reducer Code: 3014
Bruks butt end reducer type RR 700 LTLT. Incl. electric control cabinet and operators desk. This is a through feed machine. Log length: min 3,2 m - max 6,2 m. Max log diameter: 700 mm, measured 1500 mm from the butt end

Bruks RR 1000 C4 V6R Butt end reducer Code: 3016
Bruks butt end reducer typr RR 1000. incl. electric control cabinet. Max log diameter: 700 mm measured 1500 mm from the butt end. Log length: 3,0-7,5 m. Max butt end diameter: 980 mm

Cambio 70-66 BA Code: 3013
Reconditioned Cambio 66 BA with hydraulic dampers. Driveunit with new chain, sprockets, shafts and bearings. New rotor bearing. New toolholders, tools Söderhamn Camtool, all new bearings and sealings. Feedwork with new feed rollers, reinforced hubs, new gear kit ...

Cambio 71-45 CA Code: 3017
Reconditioned Cambio 71-45 CA debarker with hydraulic dampers. New rotor bearing, toolholders, Iggesund Tools. New bearings and sealings. Feedwork with new feed rollers. New hydraulic assambly for dampers.

Cambio 71-75 Debarker Code: 2182
This is a heavy duty high capacity debarker.

Nicholson 54" Debarker Code: 1317
Nicholson 43" Model 'A;. Built in 1954, retrofitted with Nicholson 54" ring in 1992

SOLD - Debarker Outfeed System - SOLD Code: 1322
Debarker outfeed system comprising of spiked roller. Outfeed rubber belt conveyor approximately 14000 x 450mm, 3 pneumatic sink kick sweepers. Jack ladder style inclined log deck, 3500mm x 4200mm 4 strand, pneumatic log singulator, excludes sub-frame

Bruks RR1000 Butt End Reducer Code: 3053
Bruks RR 1000 butt end reducer. Max butt end diameter: 980 mm. Max log diameter: 700 mm measured 1500 mm from the root end. Min log length: 3,2 meter. Max log length: 7,5 meter. Capacity: 4-7 logs per min.

Brunette MKV-35 Debarker Code: 1310
Heavy duty main frame - RH One piece frame construction Eight feedrolls Four feedroll air cylinders

Cambio 70-66 AirTen Code: 3050
Reconditioned. Hydraulic dampers. Cassette feed arms. New rotor bearing.

Cambio 70-66BA - Cleaned, Checked & Painted Code: 3041
Cleaned, Checked & Painted

Log Debarker Infeeder - New Code: 3052
New log infeed conveyor suitable for logs up to diameter 450 mm. Complete with drive unit and hydraulic power pack. Feed speed 60 m/min.

SOLD - VK 550 Cambi 2R - SOLD Code: 3051
Valon Kone debarker type 550 Combi 2R incl. self centering in feed conveyor.

Primary Breakdown - Carriages

Carriage Head Rig Code: 1356
Albany 1976/Cleerman 2007, 4 knees, temposonics, new in 2007, ran until 2008.

Primary Breakdown - Bandmills

Klamath 7' Bandmill Code: 1311

Prescott 5' Bandmill Code: 1312

SOLD - Chipper Canter & Quad Bandsaw Including Board Separator - SOLD Code: 1324
T.S. Manufacturing and Saw Quip, chipping canter, Quad bandsaw Including board separator line comprising continuous sharp chain, 25000 x 64mm, twin turning and skewing rollers, Saw Quip chipping cater heads, Saw Quip high strain Quad bandsaw, 8 x 5ft diamter sheels, 4 ...

Canter-Twin Sawline Code: 1362
Canter-Twin Sawline: Kockums 6' Twin band saws 1981 shop rebuilt by USNR in 2005

Primary Breakdown - Slabbers & Canters

Canter 240 - SOLD Code: 3043
Canter 240 is intended for the plane reduction of logs ahead of sawing machines. It may also be used for the production in one machine of timbers and sleepers.

Söderhamn 240-12 chipper canter Iggesund Code: 3023
Söderhamn chipper canter type 240-12 with Iggesund Tools canter heads. The heads are equipped with Iggesund turn knife system. Max log diameter: 500 mm. Min log length: 2,5 m. Max opening between discs: 400 mm

Soderhömn 240-12 No 68 858 Code: 3024
Söderhamn chipper canter type 240-12 with 2 spiral discs. Max log diameter: 500 mm. Min log length: 2,5 m. Max opening between discs: 400 mm. Canter discs can be replaced with other types when available.

Primary Breakdown - Infeeds & Outfeeds

Infeed Conveyor KSI-5 Code: 2109
KSI-5 is an infeed conveyor for primary breakdown machines. KSI-5 consists of two units, loading conveyor and aligning conveyor.

Secondary Breakdown - Circular & Gang Saws

SOLD - Newnes Curve Sawing 12 Double Arbor Gang Edger - SOLD Code: 1358
Optimization by Newnes 1998, updated in 2004, transverse scanning system.

SOLD - Newnes Edgers 1993 - SOLD Code: 1303
2 Complete Systems. When these edgers operated (1994 to 2004) the program for the mill was heavy to 4x4 and 4x6.

Secondary Breakdown - Bandmills - Vertical

SOLD - Quad Bandsaw System - SOLD Code: 1325
T.S. Manufacturing and Saw Quip quad bandsaw resaw system

Edgers

Chipper Board Edger Code: 3076
Chipper board edger Söderhamn type 519 incl. Söderhamn Type 516. Max inlet width: 600 mm. Min edged width: 50 mm. Max edged width: 380 mm. Max board thickness at 90 m/min: 50 mm.

Newnes 6" Bottom Arbor Combination Gang/Edger System Code: 1307
Please see pdf file for specifications.

Edgers - Edger Optimisers

SOLD - Edger Optimizer - SOLD Code: 1338
T.S. Manufacturing edger system comprising of 5 strand 2600mm (W) x 1850mm board return landing, transfer deck, 6 strand, 4300mm (L) x 3600mm (W), set of 5 spiral rolls with ending chain, 4 strand, 5 strand, 2900mm (W) x 1200mm (L) transfer deck, 5 strand, 4200mm (L) x ...

LH Coe 20' Optimised 3 Saw Edger Code: 1357
Left hand Coe, 20' optimized 3 saw edger comes with reman head, 1996 200hp top arbor, 200hp Top Chipping Head. Coe Detec Scanner Automatic Board Tailer

Newnes Optimized Board Edger RH Code: 1359
Right Hand, Newnes 20' optimized 3 saw edger comes with reman head, 1998, Newnes Scanner, updates 2004, 30" wide retec, 900 FPM, could be faster but top chip head limits, 20" diameter saw. Top Arbor, 200HP, Chip head 200HP Scanner serial # 98-281-DO, Scanner Model ...

Edgers - Edger Infeeds & Outfeeds

SOLD - Edger Outfeed System - SOLD Code: 1339
Edger tailer outfeed system with 2 linear positional gates, rubber belt conveyor 32000 x 480mm with 1000mm support legs, powered by 3 phase electric motors

Resaw

ARI KL 13 Slab Resaw Code: 3067
ARI tupe KL 13 slab resaw. Max saw blade diameter: 1,300 mm. Hydraulic drive of feed and fence rollers. Incl. main electrical motor and hydraulic power pack.

Resaw - Bandmill Resaw

36 Stenner Bandsaw VHE Code: 1308
36" Stenner Bandsaw VHE, G & C Machine - Self Centring, Hydraulic Feeding.

36 Stenner Resaw VHL Code: 1348
Two 36" VHL Resaws in good condition available.

Kasto Horizontal Bandsaw Code: 2121
Horizontal Bandsaw

5' L&B Resaw 7 Code: 1305
LETSON & BURPEE (USNR) 5' MOVING BAND MILL

Lindsaw Resaw Type CR8 Code: 3057
Single split resaw made by Lindsaw. Type CR 8 incl. in feed conveyor. Max saw blade diameter = 800 mm. Max cutting height = 300 mm. 30 kW electrical motor.

Resaw - Infeeds & Outfeeds

Soderhamn Centering Infeed Code: 3065
Centering infeed made by Söderhamn Eriksson. The infeed is suitable for cants.

Söderhamn Infeed Conveyor Type 447 Code: 3066
Infeed conveyor Söderhamn type 447 for installation in front of reducer band saw, band saw , reducer circular saw or chipper canter and cantfeed either round logs or cants. It has a cebtering and log turning function and consist of 2 sections, one log feeder and one ...

Trimmer, Sorter & Stacker - Decks & Transfers

SOLD - Incline Deck - SOLD Code: 1337
T.S. Manufacturing clean board receiving deck, inclined deck 5 strand, 3000mm (W) x 9000mm (L), with 5 pneumatic kickers, powered by 3 phase electric motor, with 600mm to 100m legs

SOLD - Grading & Trimming Line - SOLD Code: 1335
Grading and trimming line comprising 5 strand, 2600mm (W) x 15000mm (L), grading table, Overhead autolog laser scanner, 4 even end rolls with automatic length adjustment, pneumatic trim saw, Control console (Note: PLC controls to be removed from cabinet)

SOLD - Sorter Infeed Transfer Deck - SOLD Code: 1336
Sorter infeed transfer deck, 5 strand, 14500mm (L) x 3000mm (W), mounted on 900mm support legs, complete with 2 overhead infeed decks, 5 strand, 1800mm (W) x 4000mm (L), inclined transfer deck, 5 strand 4400mm (L) x 2400mm (W) on 1000mm support legs, Powered by 3 phase ...

Trimmer, Sorter & Stacker - Unscramblers

SOLD - 2 Stage Lower and Upper Board Un-Scrambler - SOLD Code: 1326
2 Stage lower and upper board un-scrambler, 4400mm (W) x 2200mm (L), complete with spiral rollcase, 5 roller, 3500m (L) x 1300mm (W), 4 transfer decks, 5 strand, 2900mm (W) x 8500mm (L), Tong feeder system

Trimmer, Sorter & Stacker - Trimmers

Almab Trimmer Code: 3036
Almab trimmer with 6 saw blades. The trimmer is to be placed on the left hand side when looking in the feeding direction.

Full Length Optimised Docking Saw Code: 1309
Full length Optimised Docking Saw Olonga T10-20NO

Bin Sling Sorter & 2003 Stacker for 8' Wide Packages Code: 1361
Sling Sorter: 48 bays sling sorter, pusher lug 1992 Bottom chain transfers Stacker: 20' Huot, high speed stacker single forks 2003, 8' wide green packages

Gunnarssons 5m Multisaw Trimmer Code: 1354
Gunnarssons 5m Multisaw Trimmer Model JV190 Still operational until early 2010.

LH Optimized Trimmer Code: 1360
Left Hand Optimized Trimmer: Single board unscrambler 2000 Newnes Revolver lug loader 2000 PHL Industries 20' high speed trimmer 2000 comes with 11 motorized saws 7.5hp (saws ajustable - see pics - note pic for motor specs) D-TEC 20' optimization, scanner DTec ...

Newnes Scanner, Trimmer, Bin Sorter for sawmill & planermill Code: 1302
1992 Newnes Trimmer Optimiser, Bin Sorter & Stacker. The equipment was installed new in 1993 and then retired in 2004 - the mill had planned to relocated it - but this never happened. This equipment and building sits in the middle of the yard and since 2004 has not ...

SOLD - Pneumatic Automatic Cut Off Saw - SOLD Code: 1334
Pneumatic automatic cut off saw, Up cut, Complete with 4400mm (L), 350mm Rubber belt conveyor and offcut chute

Valmet Trimmer Code: 3042
Valmet trimmer with 5 saw blades. The trimmer is to be placed on the right hand side when looking in the feeding direction.

Trimmer, Sorter & Stacker - Bin Sorters

SOLD - 31 Bin Sorter, 120 pieces per minute - SOLD Code: 1331
31 Bin sorter, 120 pieces per minute, thickness 15.5mm to 150mm, Length capacity 1800mm to 3600mm, Overall dimensions x 45000mm x 3000mm, 20hp hydraulic power-pack, 5 x 6 strand takeaway chain lines, 60 metres total length, Control cabinets and consoles

Trimmer, Sorter & Stacker - Tray Sorters

Tray Sorter - SOLD Code: 3034
Tray sorter with 10 trays. Even end infeed roller conveyor. Infeed chain conveyor. Board elevator for feeding boards into trays. outfeed chain conveyor collecting boards from the trays. Electrical equipment.

Trimmer, Sorter & Stacker - Stackers

Almab incl automatic sticker handling - SOLD Code: 3035
Almab sticker stacker incl. complete automatic sticker handling. Two unscramblers, even end roller conveyor, single piece feeder, roller conveyor for two even ends, chain conveyor and forks for layers, automatic sticker handling, outfeed conveyor for pac

Renholmen Dry Sorting Line Code: 3039
Renholmen sorting and stacking line for dried timber. Complete with intake for packages, Dynagrade stress grading unit, 2 grading stations, 30 pockets, stacker, press and strapping equipment.

Sawshop Equipment - Saw Sharpening

SOLD - Armstrong Bandsaw Stretcher Roll - Super 4 - SOLD Code: 1327
Bandsaw stretcher roll, Armstrong, Model Super 4, Serial No. 456SDSR-9, 300mm x 1220mm steel plate, 100mm thick, motorised, 3 phase with overhead Work light and 15 amp GPO

SOLD - Armstrong Bandsaw Stretcher Roll, - Model 5 14 - SOLD Code: 1328
Bandsaw stretcher roll, Armstrong, Model 5 14, 300mm x 1220mm steel plate, 100mm thick, motorised, 3 phase with overhead work light and GPO

SOLD - Armstrong Varisharp No. 4 LH - SOLD Code: 1330
CNC Bandsaw Sharpener Armstrong, Varisharp, No. 4 LH, Serial No. Vsharp 76, Armstrong CNC control unit 5GX

SOLD - Armstrong Varisharp No. 4811 - SOLD Code: 1329
CNC Bandsaw Sharpener Armstrong, Varisharp, No. 4811 Serial No. Vsharp 75 Armstrong CNC control unit 5GX

Vollmer CAB 42U + EMS Code: 3031
Vollmer CAB 42U grinding machine for bandsaw blades incl. EMS side dressing machine. Blade width: 60-210 mm. Blade length: 6-11 m. Tooth pitch infenitely adjustable: 6-60 mm. Tooth depth: 4-25 mm. Feed speed: 30 teeth per minute. Grinding wheel: dia

Vollmer PMH Code: 3032
Automatic swaging and side dressing machine for bandsaw blades. Incl. supporting stands. Blade width: 130-420 mm. Tooth pitch: 20-100 mm. Tooth depth: min 8 mm. Blade thickness: 0,7-3,5 mm.

Vollmer VWM VRB Code: 3033
Roll saw stretcher and tensioning bench for tensioning and levelling of bandsaw blades. Max width: 230 mm. Blade length: 6,3-8,5 m.

Vollmer CA 300 + CBF Side Grinder - SOLD Code: 3068
Vollmer CA 300 automatic grinding machine for band saw blads incl. Vollmer CBF 300 side grinder.

Sawshop Equipment - Knife Grinding

Göckel G40 knife grinder - SOLD Code: 3030
Göckel type G40 knife grinder. Grinding length: 900 mm. In addition a separate magnetic table, grinding length: 600 mm

SOLD - Stenlunds Knife Grinder B1125 - SOLD Code: 2115
Knife Grinder

Sawshop Equipment - General Equipment

Armstrong Bandsaw Sharpener 2 SLH No.2. Code: 2117

SOLD- ISELI Tipping Machine SAM - SOLD Code: 2181
Semi Automatic stellite tipping machine.

Vollmer Original VWM40U and VRB/1 Code: 2119

Vollmer Original, Side and Front Grinder Code: 2183
Original Vollmer, Side and Front Grinder, Stenbergs. Can sell together or separately.

Vollmer Werke PMH Code: 2118

Chip, Sawdust & Bark - Chippers

Bruks 812CS Drop Feed Drum Chipper Code: 2191
Efficient machines for chipping of short wood waste, such as trim ends, lily pads, joinery waste, veneer, and plywood, as well as for re-chipping. The combination of drop feed and excellent cutting geometry for short pieces gives you a better chip quality than what you ...

Bruks 820 CM Chipper Code: 2185
BRUKS stationary drum chippers are processing different kinds on input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

Bruks 820 CM Chipper Code: 2184
BRUKS stationary drum chippers are processing different kinds of input materials, like logs, slabs, sawmill wastes, butt ends, veneer wastes and other industrial wood wastes in all wood industry segments.

Erjo 165 SN Chipper Code: 2180
The ERJO chipper type 165 SN is gravity fed rotor chipper for production of fuel chips from all kinds of wood residues.

ERJO 204 MA Chipper Code: 2128
Type: ERJO 204 MA - Capacity: 8-15, 15-25 - Kw: 55 The ERJO 204 MA is especially designed to produce pulp and board chips of hard-to-handle sawmill waste. I.e. edgings, slabs, trimmings and tops, ERJO 608 MA can also produce fuel chips.

ERJO 235TS Chipper Code: 2190

Fulghum Chipper Code: 2189

Erjo 120 VS 456 Code: 3055
Erjo 120 VS 456 drop feed chipper for edgings, slabs and trimmings. Excl. motor. Drum diameter 120 cm. Drum width 45 cm. 6 knives. The chipper is reconditioned.

ERJO 200SN Chipper Code: 2101
Produces uniform sized fuel chips from: Woodwates, veneer, particle board, hardboard, plywood etc

Erjo 204 MA 450 Code: 3054
Drop feed chipper type Erjo 204 MA 450. For chipping of sawmill waste i.e. edgings, slabs and trimmings. Reconditioned. Electrical motor 55 kW. 4 knives. Capacity appr. 15-25 m3 chips/hour.

Chip, Sawdust & Bark - Hoggers & Mills

WSM Hogger - Refurbished Code: 2187
West Salem Machinery Hogger Model 2432B Serial No. 5901104

Chip, Sawdust & Bark - Chip Screens

Bruks Chip Screen Type BS 32/3 Code: 3056
Bruks chip screen type BS 32/3. Incl. steel frame with wires. Averages capacity = 60 m3 chips/h. Top capacity = 100 m3 chips/h. Screening area for chips, upper deck = 5 m2. Screening area for saw dust, lower deck = 3,1m2. Electrical motor 4 kW.

Chip, Sawdust & Bark - Chip & Sawdust Bins

Tongariro Chip & Sawdust Bins Code: 1364
Sawdust Bin · Length – 6.7m Chip Bin · Length – 9.2m

Chip, Sawdust & Bark - Fuel Handling

SOLD - Rubber Belt Conveyor - SOLD Code: 1341
Rubber belt conveyor, 32000 x 600mm, Powered by 3 phase electric motor

TS Manufacturing Vibratory Conveyors x 3 Code: 2188
Total length approx 52 metres x 600mm (w).

Vibrating conveyor Code: 3038
Vibrating conveyor manufactured by Gösta Hedlund AB. Length: 8 m. Width: 400 mm.

Bruks Feed Hopper Code: 3074
Bruks feed hopper with hydraulic dive, 3 kW. Volume: 6 m3.

Bruks Idler Roller Conveyor 600mm Code: 3060
Bruks idler roller conveyor. Complete with gear and motor. Length = 39 meter. Width = 600 mm.

Bruks Idler Roller Conveyor 800mm Code: 3059
Bruks idler roller conveyor, complete with gear and motor. Length = 11 meter. Width = 800 mm.

Bruks Scraper Conveyor Code: 3069
Bruks scraper conveyor. Length: 18 meter. Width: 500 mm. Complete with drive unit.

Bruks Tubulator TT 500 Conveyor Code: 3058
Bruks Tubulator TT 500 Conveyor. Length = 45 meter. Width = 500 mm. Capacity = 400 m3s / hour. Feed speed max 150 m/min. Length of each section = 6 meter.

Bruks Vibrating Conveyor Code: 3071
Vibrating conveyor made by Bruks. Length: 24 meter. Width: 450/650 mm. Incl. metal detector and built in screen.

Erjo Feed Hopper Type M10 Code: 3073
Erjo feed hopper type M10. Electric drive 1,5 kW. Capacity 10-30 m3/h.

IWD Tital VK-10 Strapping Machine Code: 2186
Strapping Machine, Height 3400mm - Width 2100mm

Jaymor Metal Detector Code: 2195
Jaymor Industries Ltd manufacture heavy duty industrial metal detectors to suit the individual customer's needs. The Jetscreen Metal Detector range will positively identify tramp metal before any damage is done further down the line.

Rens Metal Detector Code: 2194
Rens L240 Control Instrument has proven itself in hundreds of installations in the United States, Canada and in other countries.

SOLD - Auger Saw Dust Conveyors x 3 - SOLD Code: 1344
3 x Auger saw dust conveyors, 1 x 150mm diameter, 2 x 200mm diameter approximately 14 metres in overall length, powered by 3 phase electric motors

SOLD - Incline Airmax Rubber Belt Trough Conveyor - SOLD Code: 1346
Inclined Airmax Rubber belt trough conveyor, Approximately 150 metres x 600mm, Steel support legs to 6000mm (H), colour bond enclosure, emergency stop cable, approximately 7000mm, Steel support structure with 2 way directional off load chute, Powered by 3 phase ...

SOLD - Mild Steel Chip Cyclone - SOLD Code: 1340
Mild steel chip cyclone, 1800mm (H) x 1500mm diameter, bottom outlet

SOLD - Rubber Belt Conveyor - SOLD Code: 1345
Rubber belt conveyor, approximately 45000mm x 400mm mounted on steel legs, powered by 3 phase electric motor

SOLD - Rubber Belt Conveyor - SOLD Code: 1342
Rubber belt conveyor, 70000 x 450mm, Powered by 3 phase electric motor, includes safety lanyards x 2

SOLD - Rubber Belt Conveyor - SOLD Code: 1343
Rubber belt conveyor, 6200 x 280mm, Powered by 3 phase electric motor

Vibrating Conveyor GVC Code: 3063
Log haul manufactured by Hedlunds. Length: appr. 16 meter. Double chain with dogs. Has been in production appr. 1 year only.

Vibrating Conveyor Hammars Code: 3064
Hammars vibrating conveyor type Syncro Sher. Length = 8 meter. Width = 450 mm (bottom), 600 mm (top). Complete with drive unit.

Scanning & Optimisation

Optimized Docker Code: 1355
C14_MKL CNC cross-cut system.

Scanning & Optimisation - Scanners

Two Axis x-y Curtain Scanner Code: 1314

SOLD - 2006 Autolog True Shaper Scanner and Optimization System - SOLD Code: 1323
2006 Autolog True Shaper scanner and optimization system. Full 3D scanner using Hermary LPS2016 head. Control Logix PLC front end mill system, autolog optimized edger system, CUP board