USNR's dual Head Saw Guide Resurfacer is a precision unit designed for accuracy, reliability and efficiency in saw guide resurfacing.
Complete Solution
The USNR Dual Head Saw Guide Resurfacer is a complete stand alone solution.
· Designed to accurately machine both Babbitt pads of a center saw guide in a single pass.
· Also able to machine the single Babbitt pad of end saw guides
· Efficient operation easily achieves the accuracy needed for thin kerf saw guides
Experience
We’ve been designing and installing saw guides and kerf reduction technologies since 1934 and we’ve learned a lot about the fine points in the process. Now we’ve poured all that knowledge and experience into the development of a superior saw guide resurfacing unit.
Performance
· This is a precision machine designed to maintain the critical accuracy required to guide thin kerf saws and cut lumber within close tolerances
· It’s capable of machining double sided saw guide babitt pads in one pass, for an efficient use of operator time
Flexibility
· Can be used for single sided or double sided saw guides
· Can accurately resurface many types of saw guides
Specifications
· Electrical cutter head drive motors – 120VAC-60Hz draw about 11 amps under each load
· Pneumatic air supplied by mill should be clean and dry at 2.5 scfm with 85 psi minimum supply pressure
PDF: MA-35-ESawGuideResurfacer
Enquire Today
